0A-14 General Information
General Precaution
General Precautions
Legend
1. Clean and safe costume
2. Installation of Chock blocks
3. Support by stand after jack up
Work preparations
• Prepare the tools, instruments, and special tools in
advance.
• Prepare the parts that require replacement and
parts that cannot be re-used in advance.
Clothing
• The service technician must wear a clean service
technician uniform, hat, and safety footwear.
Protect the vehicle
• Make sure to use a seat cover, etc.
• Disconnect the terminal of the battery (–) in
advance.
Always focus on safety
• Make sure to use chock block when the vehicle is
jacked up.
• After jacking up, make sure to support the
specified position using a stand.
• When lifting up the vehicle using a lift, make sure
to set the safety device.
• When performing a procedure with two or more
people, make sure to ensure each other's safety
before performing an action.
• Do not leave the engine running for an extended
period of time or perform painting in a poorly
ventilated working environment.
• Make sure to use only the special tools if the
procedure requires them for the work. Performing
the procedure using other tools may cause
damage to parts or personal injury.
• Do not use tools such as a wrench that has lost its
edges, a hammer with frayed edges, or a chipped
chisel.
• When performing work using a device such as a
grinder, crane, or welder, make sure that a
qualified technician performs the procedure while
paying sufficient attention to the handling
precautions.
LNW70AMF000101
3
1
2
LGGEN-WE-0871_7th.book 14 ページ ２００９年１０月１日 木曜日 午後３時２６分
To Next Page
Loading...
Need help?
General
