Isuzu FSS - Page 209

4-75
CONTROLS AND INSTRUMENTS
Starter Switch
LOCK : Lock is in the position fully
counterclockwise.
In this position, the key can be
inserted or removed.
Remove the key, and turn the
steering wheel until it locks. The
steering wheel will be locked
to help prevent theft. To place
the starter switch in the "LOCK"
position, press and hold the key
in the "ACC" position and then
turn it to the "LOCK" position.
ACC : Accessory is in the first position
clockwise.
In this position, the audio and
other accessories can be used
with the engine stopped.
ON : This "ON" position is in the
second position clockwise.
The key stays in this position
while the engine is running.
This position is also used for
preheating before engine start.
START : Start is in the position furthest
clockwise.
The engine is started in this
position. Release the key as
soon as the engine has started.
The key automatically returns to
the "ON" position.
NOTE
If the key cannot be turned
from the "LOCK" position to the
"ON" position, lightly move the
steering wheel clockwise and
counterclockwise while trying to turn
the key.
•
Type 1
Type 2
LOCK
ACC
ON
START
4608498sec04CONTROLSANDINSTR4-754-754608498sec04CONTROLSANDINSTR4-754-75 2015/11/0213:58:542015/11/0213:58:54