4-76
CONTROLS AND INSTRUMENTS
WARNING
Running the engine in a poorly ventilated place can lead to carbon monoxide
poisoning. Choose a well ventilated place when starting and warming-up the
engine.
If you leave the idling control knob in a high speed position without returning it to
the lowest speed position, the vehicle is likely to move suddenly during standing
start or it will consume more fuel during subsequent drive or have a shortened
clutch life. Never forget to fully turn the idling control knob back to the lowest
speed position before driving the vehicle.
•
•
Idling Control Knob
This knob is used to warm up the engine.
You can increase the engine speed by turning the knob clockwise without the need to
use the accelerator pedal.
Turn the knob back fully counterclockwise after you have used it for engine warm-up
and keep it in this position.
Right-hand drive
Left-hand drive
4608498sec04CONTROLSANDINSTR4-764-764608498sec04CONTROLSANDINSTR4-764-76 2015/11/0213:58:552015/11/0213:58:55
To Next Page
