4-113
CONTROLS AND INSTRUMENTS
CAUTION
Fully depress the clutch pedal before operating the gearshift lever.
Do not change to the low range at 30 km/h (19 MPH) or higher speeds. Doing
so may cause a failure in the transmission.
The gearshift lever is harder to move when the transmission temperature is still
low. If high-to-low range group switching is impossible when making a downshift
from the 5/6 (5th/6th gear) gate to the 3/4 (3rd/4th gear) gate, slow down the
vehicle and then select a gear appropriate for the lower vehicle speed.
•
•
•
NOTE
If low-high range switching becomes impossible
If low-to-high range switching is impossible, you can still drive the vehicle.
Have your vehicle inspected at the nearest Isuzu Dealer promptly.
If high-to-low range switching becomes impossible, you cannot drive the
vehicle. Immediately stop your vehicle at a safe place and contact the nearest
Isuzu Dealer.
•
-
-
Shifting gears from 3rd/4th to 5th/
6th (Double-H Shift Pattern Model)
When moving the gearshift lever from the
3/4 (3rd/4th gear) gate into the 5/6 (5th/6th
gear) gate or vice versa, tap the lever with
your palm lightly (do not use undue force)
to move the lever quickly toward the target
gear position.
4
5
4
5
Shifting up
Shifting down
4608498sec04CONTROLSANDINSTR4-1134-1134608498sec04CONTROLSANDINSTR4-1134-113 2015/11/0213:59:502015/11/0213:59:50
To Next Page
