Isuzu FVM - Page 277

4-143
CONTROLS AND INSTRUMENTS
How to Use the Selector Buttons
Selected
position
Operation method
Recommended
gear
Shift selector
display
indication
R
Press the "R" button. (The "R" indication
will come on).
• Used when reversing the vehicle.
- When the "R" indication flashes, press
the "N" button to reselect "N" and then
press the "R" button while depressing
the brake pedal.
"R" comes on. "R" "R"
N
Press the "N" button. (The "N" indication
will come on.)
• Used when Starting the engine
• Stopping/parking the vehicle
- Be sure to set the parking brake.
"N" comes on. "N" "N"
D6
Press the "D" button. (The "6" indication
will come on.)
• Used when Driving on normal roads (flat
or asphalt-paved roads)
- Gear shifts automatically between gears
from 1 (1st) to 6 (6th).
• Driving on moderate downhill roads
- When the "6" indication flashes, press
"N" button to reselect "N" and press the
"D" button while depressing the brake
pedal.
An indication
from "1" to "6"
comes on.
"N" comes on.
"6" "1"
|
"6" "6"
"6" "N"
flash
D5
Press the "D" button and press the" "
button once. (The "5" indication will come
on.)
• Used when Driving on uphill roads that
require more torque than that available
with the "6" (6th) gear.
• The road surface is slippery.
• Driving down the same road where the
vehicle drove up using the "6" (6th) gear.
An indication
from "1" to "5"
comes on.
"5" "1"
|
"5" "5"
D4
Press the "D" button and press the" "
button once. (The "4" indication will come
on.)
• Used when Driving on uphill roads that
require more torque than that available
with the "5" (5th) gear.
• The road surface is slippery.
• Driving down the same road where the
vehicle drove up using the "5" (5th) gear.
An indication
from "1" to "4"
comes on.
"4" "1"
|
"4" "4"
4608498sec04CONTROLSANDINSTR4-1434-1434608498sec04CONTROLSANDINSTR4-1434-143 2015/11/0213:59:582015/11/0213:59:58