Isuzu FVM - Page 289

4-155
CONTROLS AND INSTRUMENTS
5. Depress the clutch pedal, place the
gearshift lever into any position other
than "N", start the vehicle, and then
make a fine adjustment using the HSA
adjustment switch so that the brakes
are released at the appropriate time.
ADVICE
Perform the series of operations while the parking brake is firmly set.
After placing the gearshift lever into "N", slowly release the clutch pedal.
Be sure to make an initial adjustment of the HSA after adjusting the clutch pedal
play.
•
•
•
 
 
4608498sec04CONTROLSANDINSTR4-1554-1554608498sec04CONTROLSANDINSTR4-1554-155 2015/11/0214:00:012015/11/0214:00:01