Isuzu FVM - Page 436

7-12
SERVICE AND MAINTENANCE
4. Fully lift up the cab, and lock the
tilt support while holding the part
indicated by the arrow. When it is
locked, it makes a "click" sound.
Confirm that the lock of tilt support is
securely engaged.
WARNING
Do not touch the lock on the tilt
support while the cab is tilted. If you
touch it, the lock will release.
•
Lock pin
5. Insert the attached lock pin in the hole
in the tilt support.
WARNING
When performing work with the cab
tilted, securely insert the lock pin in
the hole first.
•
Not locked
Locked
Lock
Tilt support
4608498sec07SERVICEANDMAINTE7-127-124608498sec07SERVICEANDMAINTE7-127-12 2015/11/049:59:272015/11/049:59:27