Isuzu FVM - Page 438

7-14
SERVICE AND MAINTENANCE
4. Confirm that the lock portion of lever
(3) is securely engaged after the cab
has been lowered.
 
5. Raise the handle (1) until the lever (2)
catches.
Place the starter switch in the "ON"
position and make sure that the cab
tilt warning light (if equipped) does not
come on and that a warning message
(model with MID) is not displayed.
Cab Tilt Warning Light
V
→ Refer to page 4-59
1
2
4608498sec07SERVICEANDMAINTE7-147-144608498sec07SERVICEANDMAINTE7-147-14 2015/11/049:59:292015/11/049:59:29