Isuzu FVM - Page 442

7-18
SERVICE AND MAINTENANCE
2. Press the switch (4) and the cab will
be lowered. Continue to press the
switch (4) until the sound of the motor
stops, even if the cab is fully lowered.
CAUTION
The tilt cylinder will operate until the
sound of the motor stops, even if
the cab is fully lowered. Releasing
the switch before the sound of the
motor stops could damage or harm
the tilt cylinder or the vehicle body.
•
1. Set the lever (3) in the "DOWN"
position.
The warning buzzer will sound at the
same time to inform you that the cab
will be lowered.
WARNING
Do not go beneath the cab when it is
tilted.
•
Lowering the Cab
3
4
4608498sec07SERVICEANDMAINTE7-187-184608498sec07SERVICEANDMAINTE7-187-18 2015/11/049:59:302015/11/049:59:30