7-24
SERVICE AND MAINTENANCE
The power cab tilt system will not operate
when the battery is dead, or the tilt motor
or pump is faulty. Even if any of these
conditions happens, you can still tilt up or
lower the cab using the following method
rather than pressing the switch. Follow the
same steps as those normally used for
tilting up or lowering the cab until the step
of operating the lever (3).
Power Cab Tilt System
V
→ Refer to page 7-15
• Insert a screwdriver into the manual
pump socket (5) and move the
screwdriver up and down to operate
the pump.
If the System Fails to Operate
3
5
4608498sec07SERVICEANDMAINTE7-247-244608498sec07SERVICEANDMAINTE7-247-24 2015/11/049:59:332015/11/049:59:33
To Next Page
