ItaldibiPack LEONARDO SP

Need help?

Do you have a question about the ItaldibiPack LEONARDO SP and is the answer not in the manual?

Summary

General Information and Warnings

Symbols and Manual Purpose

Explains manual symbols, structure, and its overall purpose for users.

Operator Skills and Machine Identification

Details operator qualifications, manufacturer data, and CE plate information.

Directives, Delivery, and Safety

Lists applicable directives, delivery notes, final testing, and general safety recommendations.

Operational Modes and Procedures

Defines operational modes, commissioning, maintenance, and improper use procedures.

Customer Preparations and Support

Outlines customer responsibilities for installation and how to request service or order parts.

Safety

General Safety and Hazard Information

Provides general safety guidelines and information on identified hazards and residual risks.

Personal Protective Equipment and Warning Labels

Details required personal protective equipment and explains warning labels used on the machine.

Specific Hazards and Safety Devices

Covers specific risks like electric shock, crushing, and entanglement, plus safety device functions.

Machine Description

Robot Overview and Usage Limits

Describes the LEONARDO SP robot, its intended use, limitations, and foreseeable misuse.

Machine Components and Features

Identifies and describes the main parts and technical characteristics of the machine.

Installation

Unpacking and Positioning the Machine

Provides instructions for safely unpacking and handling the machine during installation.

Commissioning

Battery Charging and Powering On

Guides on charging the machine's batteries and the procedure for powering it on.

Moving, Film Roll, and Threading

Explains how to move the robot, install the film roll, and thread the film correctly.

Film Tension Adjustment

Details how to adjust the film tension for optimal wrapping.

Using the Machine

Control Panel Settings and Programs

Covers initial panel settings, language changes, and program setup/editing.

Operation Modes and Cycles

Explains standard operation, upward/downward cycles, and single upward cycles.

Emergency Procedures and Stopping

Details emergency stop functions, procedure for exiting emergencies, and machine stopping methods.

Machine Maintenance

Technician Qualifications and Safety

Outlines required technician qualifications, safety precautions, and personnel competencies.

Routine Cleaning and Component Checks

Covers daily cleaning, carriage roller checks, and motor operational checks.

Electrical Systems and Sensors

Details checks for indicator lights, grounding, fuses, proximity sensors, and photocells.

Troubleshooting and Major Servicing

Provides guidance on common issues, troubleshooting steps, and major servicing requirements.