ITALFARAD PFC 8 - User Manual

ITALFARAD S.p .A. via IV novembre n.1 Minerbio (BO) It aly
Istruzioni per l’uso
Operating instructions
Bedienungsanleintung
Notice d’utilisation
Instrucciones de uso
I
GB
D
F
E
I
GB
D
F
E

Summary

Preliminary Operations

Safety and Connection Precautions

Read operating instructions carefully before connecting the power factor controller.

Controller Manual Introduction

Wiring and Installation Details

Wiring Diagrams and Safety

Electrical diagrams for PFC5/PFC7 and PFC8/PFC12, with critical safety warnings.

Controller Setup and Operation

Power Up, Parameter Setup Methods, and Keypad Guide

Covers initial power-up, parameter setup overview, and detailed keypad configuration.

Basic Menu Parameters

Basic Parameter Table and Descriptions

Advanced Setup Procedures

Step Coefficients, PC Setup, and Rapid CT Setup

Automatic Parameter Configuration

Automatic Setup Overview and Cautions

Guide to automatic configuration, including important warnings and limitations.

Advanced Menu Parameters

Advanced Parameter Table and Descriptions

Advanced Parameters and Alarms

Overload, Temperature, Event Settings, and Alarm Overview

Alarm Management

Alarm Codes Table and Detailed Descriptions

Table of alarm codes, activation settings, and detailed explanations of each alarm condition.

Technical Specifications

Electrical Specs, Control Range, and Connections

Terminal Block Layouts

PFC5;PFC7 and PFC8;PFC12 Terminal Diagrams

Programming Software Manual

Software Overview, Requirements, and Installation

Introduction to software functions, system requirements, and installation instructions.

PC Software Connection Guide

Software Setup Options and Connection Procedure

Guidance on setup procedures and instructions for connecting the PC to the controller.

Software Interface Elements

Controls, Displays, Step Monitoring, and Commands

Software Configuration Management

Accessing Setup Menus, Settings Management, and Alarm Customization

Connecting Cable Specifications

RS232;TTL Converter Cable Overview and Technical Details

ITALFARAD PFC 8 Specifications

General

Model	PFC 8
Brand	ITALFARAD
Reactive Power	8 kvar
Protection Degree	IP20
Frequency	50 Hz
Operating Temperature	-25 to +55 °C