Need help?Do you have a question about the ITALIAN STAGE IS S115A and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Frequency Response | 40Hz - 120Hz |
| Output Connectors | XLR |
| Enclosure Material | Plywood |
| Woofer Size | 15 inches |
| Input Connectors | XLR |
Demonstrates a flat configuration setup for the audio system.
Illustrates a setup using high pass crossover outputs.
Guidelines for safe use of power supply, cords, and adapters to prevent hazards.
Advice on device placement, ventilation, and environmental conditions to prevent damage.
Safe handling practices, volume limits, and precautions against water or abnormalities.
Instructions on how to properly install the speaker on a flat surface or stand.
Guide for connecting power and audio signals using XLR and jack cables.
Reverses the polarity of the subwoofer's signal.
Activates the high pass filter for the outputs.
Includes Power, Signal, and Limit LEDs for status indication.
Rotary control to adjust the signal level sent to the subwoofer.
XLR connector for external active speakers (left channel).
XLR connector for external mixer or source device (left channel).
Lifts the ground of balanced audio inputs from amplifier earth-ground.
XLR connector for external mixer or source device (right channel).
XLR connector for external active speakers (right channel).
Contains serial number and electrical specifications.
Port for connecting the main power cable.
Switch to turn the speaker power ON or OFF.
Details on balanced and unbalanced XLR wiring configurations.
To Next Page