What to do if my Italiana Camini Stove has failed ignition?
If your Italiana Camini Stove fails to ignite and there is no flame, ensure the grate is properly seated and clean. Also, check that there are pellets in both the tank and the grate. As a temporary measure, you can use a piece of solid paraffin to light the stove, but contact a technician first. If there is a flame present, contact the technician.
Why does my Italiana Camini LAYMA IDRO 18 show AL6 lack of pellets?
The AL6 error on your Italiana Camini Stove indicates a lack of pellets. This can occur because the thermocouple detects a fume temperature lower than the set value, interpreting it as the absence of flame. To resolve this, check that there are pellets in the tank. Also, ensure that the water temperature hasn't increased due to a closed valve; if so, call a technician. If the issue persists, contact a technician.
What to do if my Italiana Camini Stove displays ALA hot water?
If your Italiana Camini Stove displays 'ALA hot water', it means the water temperature in the boiler stove is above 90°. You should check the plumbing system, look for air in the circuit, and inspect the circuit valves/cocks. Also, ensure that the boiler stove is clean. If the problem continues, contact a technician.
General| Brand | Italiana Camini |
|---|---|
| Model | LAYMA IDRO 18 |
| Category | Stove |
| Language | English |
To Next Page
