Italiana Camini MAREA

Questions and Answers

Z
Zachary CrawfordAug 5, 2025
What to do if Italiana Camini Stove trips due to insufficient combustion air flow?
- S
  stephenhenryAug 6, 2025
  If your Italiana Camini Stove trips due to insufficient combustion air flow, check the following: - Ensure the door is closed. - Inspect and clean the combustion air extraction duct, being careful not to damage the flow sensor elements. - Clean the flow sensor with dry air. - Ensure the stove is not positioned against the wall. - Check the position and cleanliness of the combustion chamber. - Clean the smoke duct. - Verify the installation complies with regulations. - Check the flow sensor threshold (SF in the parameters). - Check that the smoke extractor is working properly. - Check revolution sensor connection.
M
mcarrollAug 13, 2025
Why is my Italiana Camini Stove remote control not working?
- N
  Natalie TurnerAug 13, 2025
  Your Italiana Camini Stove remote control might not be working because you are too far from the stove. Try moving closer. Alternatively, the remote control battery may be flat; check the battery and replace it if necessary.
J
Joseph WatsonAug 20, 2025
How to fix Italiana Camini Stove with display control panel off?
- F
  Frank GardnerAug 21, 2025
  If the display control panel of your Italiana Camini Stove is off, make sure the power cord is connected and check the fuse on the power socket.
A
Amanda MartinezAug 27, 2025
What does 'ERR 1 - ERR 2' mean on my Italiana Camini Stove display?
- B
  Billy ButlerAug 27, 2025
  If ‘ERR 1 - ERR 2’ appears on the display of your Italiana Camini Stove, it means the backup battery inside the control board is drained. Replace the backup battery.

Summary

Safety Information

General Safety Guidelines

Covers risks, correct operation, cleaning, installation, and handling precautions for safe use.

Declaration of Conformity

Compliance with Construction Products Directive

Stove complies with Construction Products Directive and EN 14785 standard.

Compliance with European Electrical Directives

Stove complies with Low Voltage and EMC directives.

Principle of Operation

Combustion Process Overview

Explains pellet transfer, ignition, and fume extraction mechanisms.

Air Circulation and Control System

Details air circulation, electronic control, and synoptic panel functions.

Stove Features and Covering

Covers tray, cast iron structure, serial port, and external covering options.

Notes on Fuel

Pellet Specifications and Usage

Details recommended pellet type, size, and substances not to burn.

Pellet Quality and Characteristics

Lists required pellet characteristics like diameter, moisture, and heat output.

Technical and Heating Specifications

Performance Specifications

Details hopper capacity, efficiency, power output, and autonomy.

Physical and Installation Dimensions

Covers heating capacity, weight, and smoke/air duct diameters.

Electrical Characteristics

Power Supply and Consumption Details

Details power supply voltage, average consumption, and ignition consumption.

Electrical Protection and Remote Control

Specifies fuses for power supply and circuit board, and remote frequency.

Safety Devices

Thermocouple and Air Flow Sensor

Explains the function of the thermocouple and air flow sensor.

Safety Thermostat Function

Details the safety thermostat's role in shutting down the stove.

Serial Port and Backup Battery

Serial Port for External Control

Details the serial port for dealer-installed remote control options.

Backup Battery Information

Explains the backup battery function and potential error messages.

Assembly and Installation

Regulatory Compliance and Compatibility

Advises compliance with local standards and checks for device compatibility.

Power Supply Connection Verification

Details requirements for power supply connection and earthing.

Safety Distances and Fire Prevention

Specifies minimum distances for flammable items and floor/wall protection.

Air Inlet Requirements

Details required air inlet cross-section for combustion.

Smoke Outlet and Chimney Installation

Covers smoke pipe material, sealing, and chimney flue connection.

Stove Covering Assembly

Steel Covering Assembly Steps

Step-by-step instructions for assembling the steel stove covering.

Soapstone Covering Assembly Steps

Step-by-step instructions for assembling the soapstone stove covering.

Interface and Operation

Control Panel Overview

Describes the display and keys: ON/OFF, Menu, +/-.

Pre-Ignition and Ignition Procedures

Lists pre-ignition checks and details automatic/manual ignition steps.

Operating Modes and Shutdown

Explains manual/automatic modes and the stove shutdown process.

Control Panel Functions

Setting the Clock and Timer

Instructions for setting the clock and programming timer functions.

Pellet Load and Dealer Settings

Allows pellet load adjustment and access to dealer-specific functions.

Remote Control Operation

Remote Control Buttons and Functionality

Details the function of each button on the remote control.

Remote Control Usage and Care

Covers transmission range, battery life, cleaning, and handling.

Troubleshooting Guide

Common Problems and Solutions

Lists common issues like panel off, remote not working, no flame, ignition failure.

Causes and Handling of Shutdowns

Explains reasons for shutdown (No depression, Stop Fire, Black-out, etc.).

Detailed Troubleshooting

Air Flow and Smoke Expulsion Issues

Troubleshooting for 'No depression' and 'No expulsion' error messages.

Flame and Ignition Failure Diagnosis

Troubleshooting for 'Stop Fire', 'Start Fail', and no flame scenarios.

Power, Sensor, and Error Code Issues

Troubleshooting for Black-out, Broken TC, Over Temp, and RTC errors.

Servicing and Maintenance

Daily Cleaning Procedures

Instructions for shaking cleaning rods and vacuuming the stove.

Periodic and Seasonal Maintenance

Covers cleaning the flow sensor, emptying hopper, and annual dealer maintenance.