Italjet Dragster 2022 - User Manual

Introduction
Thank you
for choosing our product. We have compiled this manual to give you a comprehensive overview of the quality of this motorcycle. Please read it carefully before riding it for the first
time. It contains information about the usage of the motorcycle, key points and precautions. It also specifies the features, details and equipment of the motorcycle to ensure that you can
operate it properly. We believe that you can get to know your new motorcycle quickly and get a completely satisfying ride if you follow our advice.
The purpose of the instructions in this manual is to provide clear and concise guidance for your use of the motorcycle. Moreover, this manual describes the general maintenance
procedures and regular inspection to be carried out at the officially designated dealer or repair shop. This manual also contains instructions for easy repair. Any operations not explicitly
described in this manual require special tools and/or specific expertise: Please take your motorcycle to the officially designated dealer or repair shop for these operations.
Personal safety
Failure to fully comply with these instructions can result in a serious risk of personal injury
Environmental protection
The symbol indicates proper use of the motorcycle to prevent damage to the environment.
Good condition
Incomplete compliance with or complete failure to comply with these regulations will lead to risks of serious damage to the motorcycle and, in some cases, loss of the
right to warranty.
The symbols shown above are very important. They are used to highlight the parts of the manual that should be read with special attention. Different symbols have been used in this
manual to make the headings in the manual concise and convenient for quick search. Please read this manual carefully before starting the engine, especially the "Safe driving" section.
The safety of yourself and others depends not only on your quick reaction and agility, but also on your understanding of the motorcycle, the maintenance of the motorcycle itself and
your mastery of safe driving rules. For your safety, please get to know your vehicle well enough to be able to drive safely and manipulate it freely under any driving condition.
Important As an integral part of the motorcycle, this manual should be handed over to the new owner when the motorcycle is resold.
The 1
st
edition, February 2022
1

Summary

Introduction to the Motorcycle Manual

Chapter 1: Motorcycle Overview

User Notice on Motorcycle Accessories

Guidelines for selecting and installing accessories to ensure safe riding.

Important Notes for Motorcycle Running-In

Crucial information regarding motorcycle running-in for optimal performance.

Location of Batch Number Identification

How to find and record the VIN and engine numbers for identification.

Fuel and Engine Oil Usage Instructions

Recommendations for selecting and using proper fuel and engine oil grades.

Brake Fluid Safety and Maintenance

Safety warnings and procedures for checking and maintaining brake fluid.

Motorcycle Running-In Procedures

Detailed advice on running-in procedures for new motorcycles.

Chapter 2: Maintenance and Service

Maintenance and Regular Inspection Guidelines

General guidelines for periodic inspection, adjustment, and lubrication.

Engine Oil and Filter Service Procedures

Procedures for checking oil level and replacing engine oil and filter.

Cooling System Checks and Maintenance

How to inspect the coolant level and system.

Air Filter Cleaning and Replacement

Instructions for cleaning the main and transmission air filter elements.

Ignition System and Tyre Checks

Spark plug inspection and tyre pressure/condition checks.

Brake System Checks and Service

Inspection of brake pads, fluid levels, and CVT belt.

Electrical System Checks and Charging

Procedures for checking and charging the battery and checking fuses.

Chassis Component Inspections

Inspection of steering column, shock absorbers, suspension, and bolts.

Chapter 3: Motorcycle Controls and Usage

Motorcycle Parts Identification Guide

Diagrams and labels for major motorcycle components.

Controls and Instruments Overview

Description of handlebar controls, switches, and dashboard instruments.

Ignition Switch and Steering Lock Operation

How to operate the ignition switch and lock the steering.

Handlebar Switch Assembly Functions

Functions of left and right handlebar switch controls.

Brake Lever Operation and Adjustment

How to operate and adjust front and rear brake levers.

Kickstand Operation and Safety Precautions

Safety precautions and operational guidance for side and central kickstands.

Essential Pre-Ride Checks

Essential checks before riding, including fluids and tyres.

Motorcycle Usage and Running-In Instructions

Guidance on running-in, troubleshooting, and spark plug issues.

Chapter 4: Engine Maintenance Procedures

Automatic Transmission Component Service

Procedures for servicing transmission covers, ducts, filters, pulleys, and clutch.

Hub Cover and Wheel Axle Service

Steps for removing and refitting hub covers and wheel axles.

Flywheel, Stator, and Starter Motor Maintenance

Procedures for servicing flywheel, stator, starter motor, and magneto.

Cylinder Assembly and Timing System Service

Procedures for cylinder head, valve, piston, and timing system maintenance.

Crankcase and Crankshaft Component Service

Steps for splitting crankcases, removing/refitting crankshaft and bearings.

Engine Oil Pressure Check Procedure

How to check engine oil pressure at specified RPMs and temperatures.

Crankshaft Oil Seals and Oil Pump Service

Procedures for removing and refitting crankshaft oil seals and the oil pump.

Italjet Dragster 2022 Specifications

General

Brand	Italjet
Model	Dragster 2022
Category	Motorcycle
Language	English