Need help?Do you have a question about the Italtherm CITY CLASS 20 F and is the answer not in the manual?
General| Heat Output (kW) | 20 |
|---|---|
| NOx Class | 5 |
| Type | Condensing |
| Gas Type | Natural Gas |
| Dimensions (HxWxD mm) | 700x400x300 |
Automatic procedure for setting boiler combustion based on PCB code.
Procedure to configure the boiler model after PCB reset or replacement.
Verification of flues, hydraulic, gas, and electric connections.
Checks for condensate syphon and flue gas analysis (CO2).
Description of the control panel buttons, knobs, and their functions.
Explanation of various symbols and display indicators on the boiler.
Details on optional external devices like thermostats and sensors.
Details on optional external devices like thermostats and sensors.
Procedure for filling the DHW storage tank.
Procedures for dismounting and mounting the flow stat.
Procedures for dismounting and mounting the 3-way valve.
Steps for dismounting the burner and fan.
Steps for mounting the burner and fan.
Steps and parameters for calibrating the gas valve.
Table detailing gas supply pressure specifications and injector data.
Steps to set the boiler to OFF mode and prepare for parameter access.
How to navigate through and modify parameter values.
Procedure for saving changes and exiting parameter mode.
To Next Page
