Need help?Do you have a question about the Italtherm CITY CLASS 25 K and is the answer not in the manual?
General| Gas Type | Natural Gas/LPG |
|---|---|
| Fuel | Gas |
| Max. Heating Output | 25 kW |
| DHW Output | 25 kW |
| Efficiency | Up to 98% |
| Energy Efficiency Class | A |
| NOx Class | 5 |
| Heat Exchanger Material | Stainless Steel |
| Control System | Electronic |
| Weight | 32 kg |
| Modulation | 1:5 |
| Water pressure | 0.5 - 3 bar |
| Max working temperature | 80 °C |
| Ignition | Electronic |
| Flue gas outlet diameter | 60/100 mm |
| Power supply | 230V/50Hz |
| Protection rating | IPX5D |
| Type | Condensing |
| Dimensions (HxWxD) | 700x400x mm |
Resets the PCB to factory settings, requiring reconfiguration.
Steps to configure the PCB for the correct boiler model after reset or replacement.
Comprehensive checks for installation, flues, hydraulic, and gas systems before initial ignition.
Outlines calibration steps (automatic, manual, combustion check) for replaced boiler components.
Details the sequence of operations for boiler calibration, including gas type setting and combustion tests.
Step-by-step guide for filling and pressurizing the heating system to the correct pressure.
Procedures for dismounting, cleaning, and mounting the main exchanger, including checks.
Provides steps for removing and installing the gas valve, including calibration.
Detailed steps for performing automatic gas valve calibration using the control panel.
Detailed steps for performing manual gas valve calibration using the control panel.
Explains how to monitor the manual calibration process and interpret displayed values.
Guides on how to navigate and select parameters using the control panel buttons.
Explains how to store changed parameter values and exit the parameter access mode.
Instructions on how to access the boiler's error history using control panel buttons.
Explains how to read the error codes and identify the chronological order of errors.
Lists common error codes, their descriptions, and suggested solutions for initial errors.
Lists error codes related to plant, electrical supply, and probe issues with troubleshooting advice.
Details the error code for Antilegionella function issues and related parameters.
To Next Page
