To Next PageTo Next Page
Need help?Do you have a question about the ITC Audio T-6223 and is the answer not in the manual?
General| Speaker Outputs | 4-16Ω, 70V, 100V |
|---|---|
| Input Sensitivity & Source Impedance | Mic: 5mV/600Ω, Line: 350mV/10kΩ |
| THD | ≤1% |
| Tone | Bass: ±10dB @100Hz, Treble: ±10dB @10kHz |
| Protection | Overload, Short Circuit |
| Power Supply | AC 220V-240V/50Hz-60Hz |
| Frequency Response (Full Range) | 50Hz-16kHz (+1dB, -3dB) |
Explains the meaning of warning and caution symbols used in the manual to prevent injury or damage.
Details precautions to take when installing the mixer amplifier to prevent hazards like electric shock or damage.
Outlines safety measures and emergency procedures to follow during the operation of the unit.
Describes the controls, indicators, and ports located on the front of the T-6223(A) mixer amplifier.
Details the various input/output ports and connectors found on the back of the unit.
Explains the general user interaction and alarm handling procedures for the unit.
Details how the built-in MP3 player functions in response to alarm signals and reset events.
Describes the procedure to cancel alarm states and stop MP3 playback by pressing the reset button.
Guides users on configuring address codes and switches for device identification and setup.
Illustrates the typical rear panel connections for integrating the mixer amplifier into a system.
