● This product uses a power plug or appliance input socket as a disconnecting device with
the power supply, and must be disconnected if necessary for safety reasons.
●
This equipment is only suitable for safe use at altitudes above 2000 meters.
1. The installation environment
When installing the unit, in order to ensure the normal cooling of the host, should
avoid the poor ventilation of the place or high temperature environment, to avoid direct
sunlight.
Recommend to install cabinet or other well-ventilated place indoor. If you use the
machine in the outdoors, please pay attention to waterproof, moisture, lightning
protection measures.
Avoid installing in a violent place of vibration; do not place other equipment on the
machine.
Working temperature : +5℃~ 40℃.
Humidity is limited to 5% to 90% (non-condensing).
2. To avoid electric shock and fire
Do not touch the hands and the source with wet hands
Do not spill liquid on the machine, so as to avoid short-circuit or fire inside the
machine.
Do not place other equipment directly on the top of the unit.
Non-professional service personnel Do not disassemble the unit yourself to avoid
damage and electric shock.
3. Transport and handling
The packaging of the machine is designed and tested to ensure that the host will not be
accidentally damaged during transport. It is best to use the original packaging when handling
the unit.
Do not move the host device between the place or cold or over hot to avoid condensation
inside the machine, affecting equipment life.
4. Please follow the warning instructions on this product, the warning signs on behalf of:
Applicable to 2000 meters above sea level and below safe use
To Next Page
Loading...