19
OPERATION
3. Start 2 sets of inverter generators.The starting operation is
as the same as normal process(refer on manual book starting
parts)
ttention : Please make sure the parallel connection wires on
parallel box have been put into the parallel connection sockets
properly. If not connected properly , starting inverter generato
could be damaged.
4. The load plugs can now be plugged into socket 6 .
Warning:
Only 2 sets of A itech inverter genera tor can be parallel connected.
Only use A-itech
-
parallel connecting wire.
Make sure to connect the correct parallel wire on parallel box
into the correct socket. Connect the parallel box when generator is off.
Parallel wires are not necessary when only one generator is being used.
Read manual book carefully before operation.
To Next Page
Loading...
Need help?
General
