Itek I62002 - Prefix Code; Lcd Contrast

8
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6058
2.2 PULSE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 5 to select the FLASH & PULSE menu.
• Press 2 to enter the PULSE menu.
• Use the UP and DOWN keys to select between pulse and tone.
• Press SET to conrm.
Note: Tone: for tone dial service. Pulse: for rotary pulse dial service.
3. AREA & PREFIX CODE
3.1 AREA CODE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 6 to select the AREA AND PREFIX CODE menu.
• Press 1 to select AREA CODE.
• Use the number keys to enter the area code.
• Press SET to conrm.
3.2 PREFIX CODE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 6 to select the AREA AND PREFIX code menu.
• Press 2 to select PREFIX CODE.
• Use the number keys to enter the prex code.
• Press SET to conrm.
Note: The prex code setting is for setting internal lines, if the phone is being used in an oce space
or by a company.
4. LCD CONTRAST
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 7 to enter the LCD CONTRAST menu.
• Use the UP and DOWN keys to select the desired contrast level.
• Press SET to conrm.