Need help?Do you have a question about the ITEM Work bench E and is the answer not in the manual?
General| Depth | 24 inches |
|---|---|
| Material | Steel |
| Weight Capacity | 3000 lbs |
| Number of Drawers | 0 |
| Color | Black |
Precautions for transporting the work bench, securing loads, and avoiding hazards.
Installation safety, deactivating power, securing cables, and avoiding trip hazards.
Acclimatisation, secure integration, and starting up fully installed products.
Authorised personnel, preventing unintentional movement, emergency shutdown, and user safety.
Cleaning precautions, suitable equipment, and avoiding aggressive substances.
Maintenance procedures, switching off power, and preventing live connections.
Disposal according to national and international regulations.
Guidelines for proper installation, operation, and maintenance of the work bench.
Definition of improper use and its associated risks.
Requirements for qualified personnel for assembly, operation, and maintenance.
Explanation of attention, warning, and information symbols used in the manual.
Declaration of conformity with relevant EU directives and standards.
Description of the item work bench 4 E FIFO, a combination of work bench and FIFO rack.
Description of the electrical, height-adjustable work bench E.
Description of the electrical, height-adjustable work bench 4 E.
Overview of available working surfaces for the tables.
Information on combining benches with accessories and extending basic frames.
Key operating data including column count, load capacity, and speed.
Temperature, humidity, and air pressure operating and storage limits.
Permissible bending moment, overhang load, and torque load for columns.
Guidelines for selecting a suitable environment for installation and use.
Instructions for levelling the work bench using a spirit level.
Information on synchronous control systems for table columns.
Electrical connection diagram for Table E (ST2).
Electrical connection diagram for Table 4 E (ST4).
Important considerations for installing and operating the control system safely.
Safety measures and precautions to follow when starting up the table.
Procedure for initialising table columns using the RESET function.
Steps to reset the system after a power failure.
How to adjust the table column height using the manual controls.
Explanation of the on-time limiter function to prevent overload.
Definition and operation of the safety range for table columns.
How the control system detects and responds to overloads.
Description of the soft start and soft stop feature for drives.
How to engage and disengage the movement lock function.
How to store and recall height settings using the memory function.
Procedure for moving table columns to pre-stored heights.
How to set electronic upper and lower travel limits for collision prevention.
How to change the display unit between centimetres and inches.
Detailed list of error codes, their causes, and solutions for manual controls.
Safety warnings before carrying out maintenance or replacement.
Requirement to use only original spare parts for replacements.
Declaration of incorporation for partly completed machines (table columns).
Details from specification plates for different workbench types.
To Next Page
