EasyManua.ls Logo

Iteris Vantage RZ4 Series User Manual

Iteris Vantage RZ4 Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Part Number 493470301 Rev. E

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Iteris Vantage RZ4 Series and is the answer not in the manual?

Iteris Vantage RZ4 Series Specifications

General IconGeneral
BrandIteris
ModelVantage RZ4 Series
CategorySecurity Camera
LanguageEnglish

Summary

1. INTRODUCTION

Vantage Camera Benefits

Key advantages of Vantage cameras, including specialized design, optimized performance, and ease of installation.

Vantage Camera System Overview

How cameras connect to the Edge2 processor for traffic detection and monitoring.

1.2 Tools and Equipment

2. Camera Installation

Camera Mounting Procedures

Details on mounting the camera using brackets, banding, and considering height and angle.

Cable Routing and Termination

Guides for running video/power cables, grounding, and connector preparation.

Camera Grounding Procedures

Essential steps for proper camera grounding to prevent voltage threats.

Connecting Vantage Cameras

Step-by-step instructions for power and video connections on the RZ4 Advanced model.

Cabinet Connections

How to connect camera power in the cabinet and install surge protection.

Video Surge Protection Installation

Importance and installation of surge protectors for video coaxial cables.

3. Camera Adjustment

Configuring Camera Field of View (FOV)

Guidelines for setting optimal camera angle, zoom, and avoiding occlusion for effective detection.

Optimal Camera Angle and Rotation

Adjusting camera pan, tilt, and rotation for best view and sun protection.

Using the Lens Adjustment Module (LAM)

Instructions for connecting and using the LAM for camera focus and field of view adjustments.

4. Troubleshooting Guide

Troubleshooting No Video Signal

Steps to diagnose and resolve issues where no video is displayed on the monitor.

Resolving Focus and Zoom Issues

Solutions for when the camera cannot be zoomed or focused using the LAM.

Fixing Intermittent Video

Diagnosing flickering video and associated processor LED behavior.

Troubleshooting Monitor Noise

Identifying and resolving noise issues on the video monitor feed.

Adjusting Brightness and Contrast

Steps to fix excessively bright video display on the monitor.

Adjusting Monitor Brightness

Steps to fix excessively dark video display on the monitor.

Resolving Multiple Video Indicators

Addressing issues with multiple "Video In OK" LEDs when connecting a single video source.

5. MAINTENANCE

Cleaning the Vantage Camera Lens

Recommended procedures for cleaning the camera's front glass to maintain image quality.

Inspecting Cables and Connectors

Periodic checks for corrosion or damage in camera connections and cables.

6. Technical Information

Belden 8281 Coaxial Cable Specifications

Technical details for the required Belden 8281 coaxial cable, including electrical properties.

EDCO CX06-M Surge Protector Specs

Specifications for the EDCO CX06-M surge protective device used with Vantage systems.

Carolprene SJOOW Power Cable Details

Technical data for the outdoor-rated 16AWG 3-conductor power cable.

Vantage RZ-4 Advanced Camera Specifications

7. PRODUCT SUPPORT

Contacting the Iteris Support Team

Information on how to reach the Iteris Product Support Team for assistance.

Related product manuals