Need help?Do you have a question about the Itho Daalderop 04-00046 and is the answer not in the manual?
General| Product Type | Wireless RF Module |
|---|---|
| Model Number | 04-00046 |
| Brand | Itho Daalderop |
| Compatibility | Itho Daalderop ventilation systems |
| Frequency | 868 MHz |
Highlights definitions of Warning, Caution, Note, and Tip for understanding manual instructions and hazards.
Provides details on the sensor's function, optimal placement for humidity control, and its communication with the ventilation unit.
Details dimensions, weight, housing, power supply, battery life, sensor type, measurement range, and RF specifications.
Lists compatible ventilation units that the wireless sensor can be connected to.
Provides critical placement advice for bathrooms and utility rooms, and warns against placement near windows or doors.
Explains the expected battery life of approximately two years and the red LED indicator for low battery.
Details opening the sensor by releasing the latch and attaching the sensor to the wall using supplied screws.
Details inserting batteries into the compartment and placing the cover back on the installed wall support.
Explains the meaning of the status LED colors and flashes for the ventilation unit and sensor.
Details how to set different ventilation speeds using the touch button and the corresponding LED states.
Explains automatic modes, duration limits for speeds, and how to revert to Auto speed after a set time.
Describes the Auto Night speed setting for increased ventilation during the night and its manual activation.
Explains how the system indicates dirty filters via wireless messages and the sensor's orange LED status.
Provides instructions to reset the dirty filter indication after cleaning or replacing filters.
Guides on how to link the sensor to the ventilation unit, including pairing status indicators.
Details how to enter configuration mode and set parameters like room type and duration of ventilation speeds.
Presents detailed options for room type, maximum duration high speed, and non-automatic selection.
Summarizes settings for room type and duration of high-speed and non-automatic ventilation selections.
Explains how to enter user settings mode and configure sensitivity to rising humidity.
Details user settings for relative humidity sensitivity, including default and alternative options.
Provides guidance on sensor maintenance, battery replacement, and interpreting red status LED for RF malfunctions.
To Next Page