Simon Version 2 Quick Guide
https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]
To disarm, press the [Disarm] button once + your [security code].
For more information on this topic please visit the complete Simon Version 2 manual.
Battery
The Simon Version21 operates on the 7.2V Battery Pack.
Loss of AC power and use of backup battery power is indicated by No AC.
A low battery condition is indicated by Low Bat.
For instructions on replacing your battery, please go to the Battery Replacement Page for this battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, open the door or window you want to bypass and keep it open during the
arming process.
Press the [Arm Doors & Windows] button. The system will announce that a sensor is open. Press
the [Arm Doors & Windows] button again to bypass those zones left open.
To unbypass, press [DISARM] + [security code].
For more information on this topic please visit the complete Simon Version 2 manual.
Change Date and Time
To change the date and time settings:
Enter your [security code].
Select [CLOCK SET] from the Start menu.
To change the clock settings, press and hold the [Hours] button.
Use the [+] and [-] keys to find and select the desired hour.
Use the [+] and [-] keys to find and select the desired minutes.
Press the [Done] button to set the time and exit the menu.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To Next Page
Loading...
