To Next PageTo Next Page
Need help?Do you have a question about the ITW GSE Hobart 4400 and is the answer not in the manual?
Details the manual's organization into chapters and appendices.
Overview of the ITW GSE 4400 generator set and its capabilities.
Identifies and illustrates the main physical components of the generator set.
Details physical, electrical, and performance specifications for the generator set.
Highlights unique features like protective monitoring and exhaust system.
Explains the control panel layout, LEDs, buttons, and display interface.
Outlines general inspection and maintenance procedures based on schedules.
Details specific maintenance tasks for engine, fuel, and cooling systems.
Covers common faults and diagnostic checks for engine, generator, and contactors.
Describes how the parts list is organized and how to use it.
Defines symbols and abbreviations used in the parts lists.
Explains the indenture level for sub-assemblies in the parts list.
Provides information on obtaining spare engine parts from Cummins.
Lists engine-related operation manuals and parts catalogs.
Overview and principle of the 28 VDC Active Rectifier Unit.
Details output cable specifications and connection methods for aircraft.
Explains the converter's interlock system for safety.
Guides on adapting DC output power and operating the ARU.
Lists available options and their part numbers.
Explains wet stacking in diesel engines and how to alleviate it.
Lists environmental conditions affecting equipment use or safety.
Details operational conditions deviating from standard parameters.
Introduces programming procedures for Control and Display boards.
Step-by-step guide for programming the Control Board.
Step-by-step guide for programming the Display Board.
Confirms software installation and checks for common errors.
Details engine type, compliance, system, and performance.
Lists built-in protection features for the engine.
Covers continuous ratings, voltage, frequency, and overload capabilities.
Provides physical measurements and weight information.
Details voltage regulation, adjustment, compensation, and distortion.
Lists protective functions against voltage, frequency, and overload.
Enumerates standard features of the generator set.
Lists optional features available for the generator set.
Specifies compliance with industry and regulatory standards.
General