9
IONIZING AIR NOZZLES 5200378 Rev. F
5. OPERATION
Before energizing any power supply:
1. Ensure that the nozzles are properly grounded.
2. Ensure that the power supply is properly grounded.
3. Ensure that the nozzles have been properly located, positioned and installed.
After the above checks have been performed, simply energize the power supply and open
the supply of compressed air to the nozzles.
NOTE – Do not allow dust, dirt or debris to block or obstruct the nozzle outlet.
CAUTION – Electrical Shock Hazard – Always disconnect power supply before
cleaning static neutralizing equipment. Avoid touching static neutralizing points
when power supply is energized.
To Next Page
Loading...
