g. Click OK to close the Internet Protocol (TCP/IP) Properties window.
h. Open Internet Explorer and enter http://192.168.100.253
to follow the repeater mode
settings as described in the Repeat mode setting section.
i. After set up close Internet Explorer.
j. Repeat steps c to fabove. Click to select Obtain an IP address automatically. Click OK
and close the windows. The repeater mode should be able to set up.
Repeater mode setting
Follows the steps below to configure the repeater.
1. In the login window displayed below, enter the user name and password printed on
the bottom label.
2. Click Loginto enter the configuration page.
3. Click
Setup Wizard in the navigation bar on the left pane of the page, select Wireless
Universal Repeater Mode
and click Next.
4. Click Site Survey to search for the wireless network you want to connect. Select a
desired network and click
Next.
To Next Page
Loading...