5. The speedometer of the instrument assembly is a device showing the driving speed (unit:
k
m
/
h
)
a
n
d
the
mileage. The power meter is the size of the voltage in the battery, which refers to the high power
in
the H
position and the pointer showing the low power in the L position. When the pointed light on
the
instrument
flashes, it indicates the direction of turning or changing, and the middle light indicates
the
high beam and
low be
am.
6. The right brake handle (front brake handle) is the handle of the front wheel brake brake and
br
ak
e
power
off control switch. When holding the brake handle, the front brake works and the front wheel stops turning.
It is recommended that the front and rear brake handles should be used in
emer
genc
y
braking. Note: do not
use only the front brake handle, otherwise the vehicle is prone to sideslip
.
7. The rearview mirror is to observe whether there are pedestrian vehicles left or right, to ensure
the
driving safety when turning (or
ov
ertaking
).
8. The main lock (ignition lock) is the switch to control the vehicle power supply and the controller,
t
h
e
ignition
lock lock can control the vehicle work, when the vehicle abnormal fault, the speed
c
ontrol
handle lost the
motor speed, please immediately close the switch to
OFF,
can safely stop the
v
ehicle work, to avoid safety
ac
cident
s.
9. Horn switch, press the switch, the horn rings.
10. The parking device is used for parking vehicle after parking. Hold the left brake handle after
driving, then hold the main lock device up and open the left brake handle. At this time, the
p
arking
device
will have the effect of
p
arking.
To Next Page
Loading...