What’s in the Box?
1 x Digital Humidifier
1 x Power Adapter
1 x Owner’s Manual
Parts & Controls
Using Your Humidifier
Filling Water Tank:
1. Use Tank Handle (6) to lift Water Tank (9) off unit base.
2. Unscrew tank cover by turning counterclockwise.
3. Fill tank with cool clean tap water only.
4. Replace tank cover by turning clockwise. Ensure rubber seals well.
5. Replace tank onto humidifier base.
Note! Do not fill with any liquid other than tap water. Do not run tap directly into tank. Use filling cup.
7
6
9
15
10
Bottom
Buttons
14
13
1
11
12
8
2
3
4
5
1. Power Button
2. Humidity Button
3. Heating Button
4. Timer Button
5. Misting Button
6. Tank Handle
7. Mist Nozzle
8. Humidity Sensor
9. Water Tank
10. Night Light
11. Float Switch
12. Water Inlet
13. Water Outlet
14. Air Inlet
15. Air Outlet
To Next Page
Loading...
Need help?
General