8
INSTRUCTIONS / CARE
DE-ICING THE COOLER
When ice accumulates in the unit, you can de-ice the
product manually by using the following steps:
1. Unplug the beverage cooler.
2. Wait for all the ice to melt.
3. Remove water in the unit once the ice has melted.
4. Plug in and restart the unit.
CLEANING THE EXTERIOR:
• Unplug the unit before cleaning.
• Do not use abrasive cleaning products.
• Wash the exterior of the cooler with soap and water
only. Then, rinse o the exterior thoroughly.
• Clean the glass door with glass cleaner, or use soap
and water with a soft cloth.
• Wipe the temperature control with a damp cloth. Then,
dry thoroughly.
INSTRUCTIONS / CARE
7. Mount the upper hinge (part 2) in its new location aligning it
with the mounting holes. Press the cover (part 1) down over
the upper hinge to attach.
8. Align the door on the upper hinge (part 5). Bring the lower
hinge (part 3) to the cooler, align it with the door, and fasten
it to the cooler using the foot (part 7).
9. Fasten the lower hinge screws (part 6) to the lower hinge to
finish mounting the door.
10. Mount the remaining foot (part 7) and screw on the opposite
side of the hinge.
To Next Page
Loading...
Need help?
General
