Ivation IVAEAC01 - Powering the Cooler On;Off; Selecting a Function;Fan Speed

6
Connect the USB power cable to
the USB socket at the rear of the
unit, and to a power adapter.
Press the
LOW button on the top of the unit to set
the fan speed to low.
Press the
ON/OFF button on the top of the unit to
turn it on.
Press the
HIGH button on top of the unit to set the
fan speed to high.
Press the
ON/OFF button on the top of the unit to
turn it o.
Press the
COOL button on top of the unit in
conjunction with either fan speed to activate the
pump inside the water tank and saturate the cooling
pad inside the unit. Heat flowing through the cooling
pad will exchange with the water and cause the
surrounding air to decrease in temperature as it
passes through the cooling pad.
If the water tank is running low, the COOL status
indicator light will blink red, and the water pump will
automatically stop. Refill the water tank and press the
COOL button to re-enter COOL Mode.
Powering the Cooler On/O
Selecting a Function/Fan Speed
1
1
2
2
3
3
USAGE
USAGE