Ivation IVAPSH01 - Product Usage; Assembly and Operation; Charging the Battery

Usage
Operate Battery Powered Portable Shower
• Attach inlet connector (part #8) to pump (part #1) and tighten by turning counterclockwise. Ensure tight seal to
avoid leakage.
• Insert O-ring (part #10) into outlet connector (part #9).
• Attach outlet connector (Part #9) to shower head (part #11) and tighten by turning counterclockwise.
• Press On/Off switch (part #2) to turn on.
• Submerge pump (part#1) in water and hold shower head (part #11) level with pump.
IMPORTANT: Allow pipe to fill up without overworking pump mechanism.
• Wait until pipe is filled with water.
• Position shower head (part #11) using included hook (part #13) or bracket (part #12).
Important: Ensure shower head is securely positioned before use. Do not remove pump from water while in use – power
off pump before removing.
Charge Built-In Battery
• Open socket cover (part #4) by turning it clockwise.
• Insert included USB charging cable (part #15) into charging socket (part #3).
• Plug USB charging cable (part #15) into mobile phone charger (2.5 hours), car USB (2.5 hours), or computer USB
output (5 hours).
4
Assemble Parts