EasyManua.ls Logo

Ivation IVAPSH01 - General Maintenance; Detaching the Shower Device; Filter Cleaning; Battery Care and Storage

Ivation IVAPSH01
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
Automatic Interrupt
For battery protection, Battery Powered Portable Shower is designed to shut off automatically in the event that voltage
drops under 2.7 volts.
Note: Please do not restart shower device before recharging it.
General Maintenance
Detach Shower Device:
Shut off device by pressing On/Off switch (part #2)
Disconnect hose from pump (part #1) and shower head (part #11). Drain any water from hose.
Remove O-ring (part #10) from outlet connector (part #9) and store safely Important: Keep pump away from very high
or very low temperatures, and from flammable or explosive goods.
Clean Filter:
Remove filter cover (part #6)
Clean filter (part #5) and filter cover (part #6) using warm water and liquid soap
Reconnect filter (part #5) and filter cover (part #6)
Battery Care:
Charge battery fully before first use. Charge fully after each use to ensure maximum battery life
To ensure battery remains in charged state, recharge battery at least once every three months. Battery will deplete
when stored for long periods
Do not charge battery beyond output 5V, 0.5-1A
Check battery clamps regularly for looseness, corrosion, defect or leakage.
Maintenance may be required
Store away from high temperatures and flammable or explosive goods

Related product manuals