4
4. Press the on/o button on the battery
pack to start.
NOTE: When finished, always turn o the power
before removing the pump from water. Running
the pump while it is not submerged may result
in damage.
3. Immerse the pump into a clean
water source.
NOTE: Do not submerge the battery
pack. This may result in an electric shock
and/or damage to the shower.
CARE AND MAINTENANCE
General Maintenance
• Drain all water from the hose before storing.
• Store the pump away from extreme temperatures.
Cleaning the Filter
• Remove the filter cover by twisting it to the right,
as illustrated.
• Clean the filter and filter cover with water and a
mild detergent.
To Next Page
Loading...