Need help?Do you have a question about the Iveco Motors CURSOR Series and is the answer not in the manual?
Details on how to maintain engine guarantee validity by following manual instructions.
Emphasizes the use of Original IVECO MOTORS spare parts to maintain engine order and liability.
Defines manufacturer liability based on proper control and maintenance operations performed by qualified technicians.
Provides essential safety guidelines to prevent damage to persons or property from improper engine use.
This document is a comprehensive Use and Maintenance Manual for the IVECO MOTORS CURSOR Series Industrial Engines. It serves as an essential guide for owners and operators, ensuring optimal performance, longevity, and safe operation of their engines.
The primary function of this manual is to provide detailed instructions and guidelines for the proper use, maintenance, and troubleshooting of the CURSOR Series engines. It covers various models, including the C78 ENT (TIER 2), C87 ENT (TIER 3), C10 ENT (TIER 2/3), C13 ENT (TIER 2/3), CURSOR78 TE, and CURSOR13 TE1/TE2/TE3, catering to a range of industrial applications. The manual emphasizes that adherence to its instructions is crucial for trouble-free, long-term operation and for maintaining the validity of the IVECO MOTORS guarantee.
Regarding usage features, the manual begins by thanking the user for choosing an IVECO MOTORS product and stresses the importance of reading the manual carefully before any operation involving the engine or its fittings. It clarifies that the content refers to the standard configuration of the engine, and illustrations are purely indicative. Some instructions are provided as a sequence of operations to ensure the engine and/or its fittings perform as intended. It also notes that certain instructions might depend on the configuration of commands and the machine setup where the engine is installed. For any discrepancies, users are advised to consult the machine manufacturer's instructions or a specific manual. The information presented in the manual was current at the time of publication, and the manufacturer reserves the right to make modifications without notice for technical or commercial reasons, or to comply with legal requirements. The manufacturer disclaims all liability for errors or omissions. Users are reminded that the IVECO MOTORS Technical Service Network is available for professional assistance.
The manual includes a "GENERAL INFORMATION" section which covers crucial aspects such as the guarantee, spare parts, liability, and safety. For the guarantee to remain valid and to ensure the best possible performance, users must meticulously follow the instructions provided. Failure to do so may invalidate the guarantee. The manual strongly advises the exclusive use of Original IVECO MOTORS Spare Parts, stating that this is essential for maintaining the engine's original running order. The use of non-original spare parts will not only invalidate the guarantee but also absolve IVECO MOTORS of any liability throughout the engine's working life.
The "LIABILITY" section clarifies that the manufacturer will only be held liable if the control and maintenance operations described in the manual have been performed, and proof of these operations must be provided. Any special maintenance tasks must be carried out by qualified technicians from authorized IVECO MOTORS Workshops, using the appropriate instruments and equipment.
Safety is a paramount concern, and the manual provides extensive information to prevent damage to persons or property due to improper or incorrect behavior. It explicitly states that engines must only be used for their intended purposes as indicated by the manufacturer. Any tampering, modification, or use of non-original spare parts can compromise engine operation and safety. Users are strictly warned against making any modifications to the wiring or engine units, or connecting them to other power systems. Particular attention is drawn to moving parts, high-temperature components, and circuits containing pressurized fluids, as well as the electrical equipment which houses currents and voltage. The manual also highlights that exhaust fumes are harmful to health. When moving the engine, only suitable lifting tackle and the provided U-bolts should be used. It is emphasized that the engine must not be started or used until the machine it is installed in meets all necessary safety requirements and complies with local laws and regulations. All operations required for optimal use and preservation of the engine must only be performed by experienced personnel using tools deemed suitable by IVECO MOTORS. Further safety recommendations are detailed in the "CONTROLS AND MAINTENANCE" chapter.
The "USE" section provides practical guidance, starting with preliminary checks, followed by instructions for starting and stopping the engine. It details how to recognize alarms and manage engine diagnosis from the instrument panel. Engine pre-heating procedures are outlined, along with advice for proper engine use, special warnings, and running-in instructions. Refuelling procedures are also covered to ensure correct fuel handling.
Maintenance features are extensively covered in the "CONTROLS AND MAINTENANCE" section. This section addresses the responsibilities of maintenance personnel and provides guidelines for accident prevention. It specifies maintenance frequencies and requirements, detailing how to proceed with various tasks. Instructions for moving the engine are included, ensuring safe handling during maintenance or relocation. The manual also provides guidance on the proper disposal of waste materials, emphasizing environmental responsibility.
For periods when the engine will not be in use, the "LONG PERIODS OF INACTIVITY" section offers crucial advice. It details the steps required to prepare the engine for a prolonged period of inactivity, protecting it from potential damage during storage. Subsequently, it provides instructions for restarting the engine after such a period, ensuring a smooth and safe return to operation.
Finally, the "ENGINE MALFUNCTIONS" section is dedicated to troubleshooting, offering guidance on identifying and addressing common issues that may arise during engine operation. This section is vital for operators to quickly diagnose problems and take appropriate action, minimizing downtime and potential damage. The manual also includes an "IN APPENDIX" section, which contains additional useful information, such as behavior in an emergency and oil viscosity levels according to surrounding temperatures, further enhancing the user's ability to maintain and operate the engine effectively in various conditions.
General| Engine Type | Diesel |
|---|---|
| Aspiration | Turbocharged |
| Fuel System | Common Rail |
| Engine Model | CURSOR Series |
| Cylinders | 6 |
| Cooling System | Liquid Cooled |
| Aftertreatment | SCR (Selective Catalytic Reduction) |
| Configuration | Inline |
| Displacement | 8.7L - 12.9L |
| Bore | 135 mm |
| Stroke | 150 mm |
| Turbocharger | Yes |
To Next Page