To Next PageTo Next Page
Need help?Do you have a question about the Iveco Motors 8060 Series and is the answer not in the manual?
Recommendations to reduce risk to persons and property when engine is in service or out of service.
Daily checks required before starting the engine, including fluid levels and air cleaner status.
Step-by-step procedure for starting the engine when it is cold, including pre-heating.
Procedure for safely stopping the engine, including idling period and solenoid valve operation.
Safety precautions during maintenance, including clothing, PPE, and electrical safety.
Scheduled tasks like oil/filter changes, fuel filter cleaning, belt tension, and valve clearance adjustment.
Procedure for checking and topping up engine oil, with a warning about overfilling.
Procedure for checking and topping up coolant, with a warning about hot systems and overfilling.
Steps for cleaning or replacing the air cleaner cartridge and checking its condition.
Procedure for starting engines with a mechanical governor, including speed adjustment.
Procedure for starting engines with an electronic governor, noting variable speed capabilities.
Procedure for safely stopping generating unit engines, differing by governor type.
Periodic checks and specific warnings for engines with turbocharger protection (Turbosafe).
Starting procedures may vary; consult system manual. Check cooling water circulation and pressure.
Disconnect load and run without load for a few minutes to allow uniform cooling.
Diagnosing causes for engine not starting, like battery charge, connections, or fuel system issues.
Diagnosing causes for engine stopping, such as clogged fuel filters or air in the fuel system.
Diagnosing overheating due to coolant level, air cleaner, or belt tension; power loss due to fuel filters or air cleaner.
Diagnosing smoking from clogged air cleaners or defective injectors, and issues with engine not stopping.
How to respond to electrocution incidents, including breaking the current and using insulating means.
Immediate actions for wounds and fractures, emphasizing calling medical services and careful movement.
General| Engine Model | 8060 Series |
|---|---|
| Cylinder Count | 6 |
| Configuration | Inline |
| Fuel Type | Diesel |
| Aspiration | Turbocharged |
| Fuel System | Direct Injection |
| Displacement | 5.9 liters |
| Power Output | 243-300 hp |
| Torque Output | 500-1000 Nm |
| Cooling System | Liquid-cooled |
