The "OMSI2 Addon Irisbus Family Low Entry Buses Manual" describes a software add-on for the OMSI 2 bus simulator, focusing on the Irisbus Crossway Low Entry series of buses. This manual provides comprehensive information for users, from system requirements and installation to detailed technical specifications, operational instructions, and troubleshooting tips.
Function Description:
The add-on introduces the Irisbus Family Low Entry Buses to the OMSI 2 simulator, allowing players to drive various models of this bus series. These buses are designed for both urban and suburban routes, offering a realistic simulation experience with detailed 3D models, authentic sounds, and customizable features. The core function is to expand the variety of drivable vehicles in OMSI 2, providing new gameplay opportunities for players interested in modern low-entry buses. The add-on includes 20 models with numerous customization options to enhance realism.
Important Technical Specifications:
The manual outlines two main versions of the Irisbus Crossway LE: Urban and Suburban, each available in three lengths: 10.6 m, 12 m, and 12.8 m.
Crossway LE Urban:
- Lengths: 12,780 mm (12.8 m), 11,995 mm (12 m), 10,790 mm (10.6 m)
- Width: 2.5 m
- Height: 3.05 m / 3.21 m
- Empty weight: 12 t
- Door widths: Front door: 1,200 mm; Centre door: 1,200 mm; Back door: 800 mm
- Tank capacity: Diesel 210 litres / Ad-Blue 60 litres
- Passenger capacity: 40 to 52 (12.8 m), 38 to 48 (12 m), 34 to 38 (10.6 m)
- Seating capacity: 34 to 46 (12.8 m), 32 to 42 (12 m), 28 to 32 (10.6 m)
- Standing room: 6
- Engine: Cursor 8 / 243 kW (330 HP)
- Gearbox: Automatic / 4 speed or manual 6 speed
- Features: Equipped with special bus seats, offering maximum freedom of movement for accessibility. Different floors, number of seats, and door types allow adaptation to various urban/suburban uses. A 3-door version is available for busy routes.
Crossway LE Suburban:
- Lengths: 12,780 mm (12.8 m), 11,995 mm (12 m), 10,790 mm (10.6 m)
- Width: 2.5 m
- Height: 3.05 m / 3.21 m
- Empty weight: 12 t
- Door widths: Front door: 800 mm; Centre door: 1,200 mm; Back door: 800 mm
- Tank capacity: Diesel 210 litres / Ad-Blue 60 litres
- Passenger capacity: 50 (12.8 m), 46 (12 m), 38 (10.6 m)
- Seating capacity: 50 (12.8 m), 46 (12 m), 38 (10.6 m)
- Standing room: 0
- Engine: Cursor 8 / 243 kW (330 HP)
- Gearbox: Automatic / 4 speed or manual 6 speed
- Features: Equipped with a floor that maximizes seating capacity with Lineo seats and seat belts, as well as luggage racks, designed for comfortable, safe, and easy passenger transport.
System Requirements for the Add-on:
- Base Game: Full version of OMSI 2 – The Bus Simulator (version 2.3 or higher)
- Operating System: Windows 10, recommended 64-bit version
- Processor: Dual-core (Core i5 with 2.8 GHz or similar), Quad-core with 3.0 GHz recommended
- RAM: 4 GB (8 GB recommended)
- Graphics Card: 3D graphics card with at least 2.048 MB graphics memory
- Sound Card: Required
- Disk Space: 4.0 GB free disk space minimum for installation
- Connectivity: Keyboard and mouse, active Steam account, and internet connection
- Software: DirectX 9.0c compatible hardware and software
- Patch: The 4GB patch for OMSI 2 is recommended
Usage Features:
The manual details the process of activating and installing the add-on via Steam, including logging in, adding the product key, and ensuring administrator rights. It also provides tips to maximize performance, such as deactivating stencil buffer effects (shadows), setting neighboring tiles to a maximum of 2, and reducing surrounding traffic and pedestrian density.
Quick Start Guide:
- Vehicle Selection: Choose between "IRISBUS LOW ENTRY FAMILY (Urban)" or "IRISBUS LOW ENTRY FAMILY (SubUrban)" based on route type.
- Model Selection: Select length, door arrangement, and production year (phase). Models are described by syntax: Name (Urban / SubUrban) - Length (10/12/13) - Door arrangement (1-2-0, 2-2-0...) - type.
- Repaint Selection: Choose appearance (Repaint) and ensure the
.hof file matches the selected map.
- Placement: Select a location for bus placement.
- Driving: Switch to driver view [F1], start electrical system [E], start engine [,], engage gear [D] (automatic) or shift to first gear and release clutch (manual), release parking brake [/].
- Night Operations: Switch on headlights [L/F] and interior lights [8] [9].
- Passenger Service: Program the display matrix via the IBIS matrix controller or menu "92E" to show the final stop.
Driver Workstation Overview:
- IBIS Unit: For programming destination displays.
- Side Switches: Controls various functions.
- Dashboard: Displays essential vehicle information.
- Air Conditioning / Heating: Controls cabin temperature.
- Ticket Printer CX6000: For issuing tickets.
- Radio: For entertainment.
Dashboard Controls:
- Left Side: Indicators, door lock, mirror heating, door brake, stop request, parking lights, high beam, hazard warning lights, fog lights, rear fog lights, retarder active, ABS active, check engine light, parking brake, kneeling, insufficient air pressure, brake valve active, warning messages, tachograph card error, low fuel level, high engine temperature.
- Left Side Area: Parking brake, additional fan, electric driver's blind, front door single leaf opening, brake valve, air extraction, reverse gear buzzer, retarder coupling to brake pedal, side mirror heater, fire alarm, front door de-icing, emergency lighting, engine start/stop.
- Center Part: Battery disconnect switch, interior lighting (full/minimum intensity), driver's workplace lighting, load compartment lighting, driver's lighting area, outdoor lighting switches (off, daytime running, low beam, fog lights, rear fog lamps, hazard warning lights), vehicle speed, remaining fuel, engine temperature, engine speed, on-board computer.
Onboard Computer:
- Main Screen: Displays warnings (door open, low air pressure, high engine temp), time, outside temperature, gear engaged, total kilometer counter, trip kilometer counter.
- Oil and Air Pressure: Displays oil pressure and air pressure.
- Trip Kilometer Counter (Trip 1): Shows average speed and trip time. Can be reset.
- Ad-Blue Display: Shows Ad-Blue level.
Heating System / Air Conditioning:
- Controls: Power button, display mode (temperature, driver/passenger area, set temp), mode (automatic/cool/heat), fan speed (auto/high/medium/low), ventilation mode (auto/fresh air/recirculated air), input error display, temperature display, temperature selection (17-27°C), odometer.
- Driver's Area Heating: Fan speed, heating position, temperature selection, fresh air/recirculated air, open/close front door, open/close back door.
IBIS Matrix Controller:
- Function: Configures internal and external bus displays (e.g., destination).
- Controls: Numeric keypad, arrow keys for stop selection, automatic/manual announcement toggle, route, line, next stop announcement, destination, enter.
Ticket Printer CX6000:
- Operation: Start with "POWER" button, log in with green button, select "Ticket Sales" (button 1), switch display language (button 2), select tickets from menu.
Maintenance Features:
- Updates: The manual emphasizes checking for updates via Steam to ensure the latest program versions and prevent faulty or missing files. Steam's "Downloads" section allows immediate update downloads.
- Data Integrity: Steam offers a function to "Check files for errors" for OMSI 2 in the library properties, which helps identify and fix corrupted or missing data.
- 4GB Patch: Users are advised to use the 4GB patch (available at www.ntcore.com/4gb_patch.php) to provide OMSI 2 with more working memory (RAM), especially if white areas appear on buses or other 3D objects. It's crucial to reload this patch after any OMSI 2 update or data check.
- Troubleshooting: The manual suggests checking the Halycon Media website (www.halycon.de/FAQs) for known problems and solutions. For startup issues, the
logfile.txt in the OMSI main directory is important for support. The OMSI Webdisk online page (https://reboot.omsi-webdisk.de) is also recommended for community support.
- Customization: For creators, a repaint guide and SETVAR list are provided in the
\OMSI 2\Addons\Irisbus-Low-Entry\ folder to configure individual equipment.
The manual also includes legal notices and credits for the development team. It highlights the commitment to optimizing 3D models for the best possible gameplay quality, both technically and visually.
Need help?
To Next Page
General