Need help?Do you have a question about the IVT 290 A/W and is the answer not in the manual?
Explains how the boiler operates under various heating and hot water demand scenarios.
Explains the process of heating hot water using the electric element in stand-alone mode.
Describes how the boiler generates heat for the heating system when used independently.
Covers scenarios of increased hot water demand and peak usage.
Instructions for checking and maintaining the boiler's pressure gauge twice a year.
Procedure for cleaning the discharge water vessel twice a year.
Guidance on checking the tap water and heating water safety valves twice a year.
Explains how to interpret and acknowledge system alarms and warning signals.
Information about the electronic protective anode and its operational indicator LED.
Details the overheat protection for the electric element and how to reset it.
How to activate and use the emergency operation mode for continued heating.
A table showing sensor resistance values at different temperatures for the unit.
To Next Page
General