Iwata Custom Micron B - Iwata Custom Micron C Plus; Iwata Custom Micron SB

6
Iwata Custom Micron C Plus
·The .23-mm uid nozzle allows slightly heavier paint than
the .18-mm uid nozzle.
·The Micro Air Control (MAC) Valve enables innite airow
control at the airbrush’s head providing control between
stipple, ne detail, and background spray eects.
·Solvent-proof PTFE needle packing allows extended
solvent-based paint usage, including automotive paints.
·A redesigned, funnel shaped gravity feed cup allows
greater paint eciency and ensures a faster, more
thorough clean up.
·The cutaway, pre-set handle allows quick ushes
and rinses.
Iwata Custom Micron SB
·The .18-mm uid nozzle is the smallest nozzle and
needle combination Iwata oers for ultimate precision
and accuracy.
·1/8 oz. (3.5 ml) side-feed cup
·Repositionable side feed cup for left or right handed use.
·View the paint surface over the top of the airbrush.
·Add the 1/4 oz (7 ml) side-feed cup, the 1/2 oz (14 ml)
side-feed cup, or the 1 oz (28 ml) siphon bottle to
increase the airbrush’s versatility.