EasyManua.ls Logo

Iwatsu SS-7810/06 - User Manual

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation
Manual
Oscilloscope
SS-7821/11
SS-7810/06
IWATSU
Question and Answer IconNeed help?

Do you have a question about the Iwatsu SS-7810/06 and is the answer not in the manual?

Summary

Introduction

Cautions for Safe Use

Guidelines for safe operation and prevention of injury or damage.

Critical Warnings

Explosive Gas Hazard

Avoid use in potentially explosive atmospheres.

Abnormal Condition Response

Immediate action for abnormal conditions like smoke or odor.

Water and Moisture Hazards

Prevent water ingress to avoid electrical shock or fire.

Unstable Placement Warning

Ensure stable placement to prevent drops and damage.

Foreign Matter Entry Prevention

Prevent foreign objects from entering ventilation ports to avoid hazards.

Power and Grounding Safety

Power Cord Safety

Use a 3-core power cord for electrical safety and proper grounding.

Rated Power Supply Usage

Operate the instrument only with the specified AC power voltage.

Proper Grounding Connection

Connect grounding leads properly to avoid electrical shock and damage.

Instrument Handling Warnings

Instrument Cover and Panel Safety

Avoid opening the instrument to prevent electrical shock from high-voltage parts.

High Voltage Measurement Caution

Exercise caution when measuring high voltages to prevent electrical shock.

Carrying Bag Requirements

Use only suitable bags for carrying to prevent drops and injury.

Power Cord Handling Precautions

Adhere to specific guidelines for safe power cord handling.

Instrument Modification Prohibition

Do not modify the instrument to avoid electrical shock, fire, or malfunction.

Operational Cautions

Fuse Replacement Guidelines

Use only the specified fuse type for replacement.

Power Cord Suitability

Use a three-core power cord appropriate for the supply voltage.

Power Connection;Disconnection Procedure

Connect/disconnect power cord only after setting the switch to STBY.

Damaged Cable;Adapter Usage

Do not use damaged cables or adapters to prevent hazards.

Object Placement on Instrument

Do not place objects on the instrument to prevent internal damage or shock.

Air Hole;Fan Obstruction Warning

Keep air holes and fans clear to prevent overheating and fire.

Moisture and Dust Environment Hazard

Avoid moist or dusty environments to prevent shock or fire.

Upright Position Stability

Ensure stability when upright to prevent falls, injury, or shock.

Cable Pulling Hazard Prevention

Prevent instrument from falling due to cable pulls.

Operation During Instrument Failure

Do not operate a failed instrument to prevent further damage or hazards.

Operating Range and Intensity Cautions

Operating Range Adherence

Operate the instrument within specified temperature and humidity limits.

Input Voltage Limits

Avoid exceeding the maximum input voltage ratings.

Ventilation Space Requirements

Ensure adequate ventilation around the instrument to prevent overheating.

Transportation Packing Guidelines

Use appropriate packing materials for safe transportation.

Front Panel Controls and Indicators

Front Panel Function Controls

Basic Operation Guide

Initial Operating Cautions

Important safety and operational cautions before starting basic use.

Automatic Setup and Calibration

Probe Compensation

Display Adjustment

Vertical Deflection System

Input Coupling Modes

Sweep Rate and Magnification

Sweep Modes

Triggering Controls

Trigger Source Selection

Choosing the signal source for triggering.

Trigger Slope and Level

Delayed Sweep Operation

Triggered Delay Sweep

Cursor Measurements

Voltage Difference Measurement

Frequency Counter

Maintenance and Calibration

Instrument Specifications

Iwatsu SS-7810/06 Specifications

General IconGeneral
BrandIwatsu
ModelSS-7810/06
CategoryTest Equipment
LanguageEnglish

Related product manuals