EN
• The switching of the machine under operation can
damage the equipment.
• After welding always disconnect the electrode holder
cable from the equipment.
• Always connect the machine to a protected and
safe electric network!
• Welding tools and cables used with must be perfect.
• Operator must be qualified!
ELECTRIC SHOCK: may be fatal
• Connect the earth cable according to standard
regulation.
• Avoid bare hand contact with all live components of
the welding circuit, electrodes and wires. It is neces-
sary for the operator to wear dry welding gloves while
he performs the welding tasks.
• The operator should keep the working piece insulated
from himself/herself.
Smoke and gas generated while welding or cutting can
be harmful to health.
• Avoid breathing the welding smoke and gases!
• Always keep the working area good ventilated!
Arc light-emission is harmful to eyes and skin.
• Wear proper welding helmet, anti-radiation glass
and work clothes while the welding operation is per-
formed!
• Measures also should be taken to protect others in the
working area.
FIRE HAZARD
• The welding spatter may cause re, thus remove am-
mable materials from the working area.
• Have a re extinguisher nearby in your reach!
Noise can be harmful for your hearing
• Surface noise generated by welding can be disturb-
ing and harmful. Protect your ears if needed!
Malfunctions
• Check this manual rst for FAQs.
• Contact your local dealer or supplier for further ad-
vice.
WARNING!
Welding is a dangerous process! The operator and other persons in the working
area must follow the safety instructions and are obliged to wear proper Personal
Protection Items. Always follow the local safety regulations! Please read and
understand this instruction manual carefully before the installation and operation!
54
To Next Page
Loading...
