Need help?Do you have a question about the iWeld TIG 200 Digital Pulse and is the answer not in the manual?
Details the name and function of each control and indicator on the welding machine's front panel.
Step-by-step instructions for performing welding operations using the DC TIG mode.
Step-by-step instructions for performing welding operations using the Pulse TIG mode.
Step-by-step instructions for performing welding operations using the MMA mode.
Guide on saving and recalling custom welding parameters for future use.
Specifies workspace conditions and critical safety measures for machine operation and user protection.
Highlights important warnings regarding electrical connections, socket capacity, and overload protection.
Provides essential guidelines for routine maintenance and care of the welding equipment.
General| Input Voltage | 220V ±15% |
|---|---|
| Frequency | 50/60 Hz |
| Output Current Range (TIG) | 10-200 A |
| Output Current Range (MMA) | 10-160 A |
| Open Circuit Voltage | 70V |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Insulation Class | F |
| Protection Class | IP21S |
| Cooling Method | Fan cooled |
| Duty Cycle (TIG/MMA) | 60% |
| Pulse Frequency | 0.5-500Hz |
To Next Page