Why is there a red light on my iWorX WR147E Lawn Mower charging base?
A red light on your iWorX Lawn Mower charging base indicates that the boundary wire isn’t connected. Check that the boundary wire has been connected correctly to the charging base and that there are no breaks in the boundary wire.
Why does my iWorX WR147E Lawn Mower have shorter run times between charges?
Shorter run times between charges for your iWorX Lawn Mower can occur due to several factors: * Something might be clogging the blade disc, creating friction. Remove the blade disc and clean it. Also, consider if the grass is too high or thick. * The blade disc might be unbalanced, causing Landroid to shake. Inspect the blade disc and blades for debris, and replace the blades if necessary. * The battery may be old or exhausted. In this case, replace the battery. * The working time may be up. Try resetting the working time.
What to do if iWorX WR147E Lawn Mower stops in the working area?
If your iWorX Lawn Mower stops in the working area, consider these possible causes: * There might be an obstacle in the working area. Remove any obstacles. * The cutting height might be too low, or the grass too dense. Raise the cutting height and gradually lower it. * The extended boundary wire may exceed 350m, causing signal problems. Reduce the length of the boundary wire. * The distance between the center of the lawn and the boundary wire may exceed 25m, causing signal attenuation. Reduce this distance to within 25m.
Why iWorX Lawn Mower does not charge?
If your iWorX Lawn Mower isn't charging, it could be due to a lack of power. Check that the power cord is properly connected to both the charger and a suitable power supply. Also, ensure that the charging strips on the mower are making contact with the center of the contact strips on the charging base.
Why is the charging time of my iWorX Lawn Mower longer than expected?
If your iWorX Lawn Mower is taking longer to charge than expected, it might be due to: * A poor connection caused by debris on the charging strip. Clean the contact pins on the charging base and the charging strip on Landroid with a cloth. * The charging protection program being activated due to high temperature. Place the charging base in a shady area or wait for the temperature to cool down.
How to fix iWorX WR147E Lawn Mower docking problems?
If your iWorX Lawn Mower is having trouble docking with the charging base, consider the following: * Environmental influences may be interfering. Try restarting Landroid. * A poor connection due to debris on the charging strip. Clean the contact pins on the charging base and the charging strip on Landroid using a cloth.
How to connect iWorX WR147E to the internet?
To connect your iWorX Lawn Mower to the internet: * Ensure your router is 2.4GHz. If it has dual settings, enable the 2.4GHz band. * Set your router to 802.11 mode and ensure the wireless setting is b/g/n mixed. * Enable the SSID Broadcast function on your router while connecting with the app; you can disable it afterward. * Make sure DHCP function is enabled. * If you changed your Wi-Fi network, reconnect Landroid to the new network. * If using a “Fritz!box” router, activate “Allow communication between devices in same network” in the settings. Also, verify that the router is connected and the WIFI SSID is correct.
What to do if iWorX Lawn Mower slips on a hill?
If your iWorX Lawn Mower slips out of its working area when going down a hill, it is likely due to low grip of the drive wheels. Ensure the wheels are clean and free of mud to maximize grip.
How to fix iWorX WR147E charging base LED light?
If the LED light on the charging base of your iWorX Lawn Mower isn't turning on, it's likely due to a power issue. Check that the charging base is properly connected to the charger and that the charger is connected to a working power supply.
Why iWorX WR147E Lawn Mower wheels skid or slip?
If the wheels of your iWorX Lawn Mower are skidding or slipping, it could be due to: * Foreign obstacles, such as twigs or branches, lodged underneath Landroid. Remove any foreign objects from the underside of Landroid. * The lawn being too wet. Wait until the lawn has dried.
General safety warnings and instructions for safe machine operation.
Instructions on understanding controls, proper use, and preparation.
Guidelines for operating the appliance safely, avoiding moving parts.
Precautions when the appliance operates automatically, especially with people or pets present.
Connecting the machine to a circuit protected by an RCD for safety.
Precautions to avoid injuries and how to safely transport the robotic lawnmower.
Maintaining separation distance for RF exposure compliance during operation.
Important safety instructions regarding the battery pack.
Visual safety warnings, disposal instructions, and appliance classification.
Guidance on reading instructions, understanding controls, and user responsibility.
Steps for preparing the Landroid and rules for safe operation.
Instructions for cleaning, checking, and storing the Landroid.
Instructions for safely transporting the Landroid.
Critical safety guidelines for handling and charging the battery pack.
Information regarding the electrical safety class of the appliance.
Describes the product's intended use for domestic lawn mowing.
Instructions on maintaining sharp blades for optimal cutting performance.
Step-by-step guide for replacing the cutting blades.
Guidelines for regular cleaning of the Landroid to maintain good condition.
How to clean upper body, bottom, drive wheels, and charging contacts.
Maintaining battery charge, manual charging, and winter storage.
Checks to perform before restarting Landroid for the new season.
Importance of keeping Landroid software updated, OTA and manual updates.
General errors like unknown, rain delay, and battery cover issues.
Errors related to boundary wire, wheels, and blade motor faults.
Errors indicating Landroid is trapped, lifted, or tilted.
Issues with battery charging or finding the charging base.
Errors related to lock function, Wi-Fi, and software update failures.
Troubleshooting charging base lights, blade spinning, and vibrations.
Problems causing uneven cutting, scheduling, or blade sharpness.
Extended charging time, short run-times, and mower not charging.
Problems with docking, connections, wheel skid, and slipping.
Landroid issues related to boundary wire, area coverage, and signal.
Landroid slipping on slopes due to low wheel grip.
System crashes, shutdowns, obstacles, and flipping issues.
Issues connecting to the internet, related to router settings.
Guidance on proper disposal of waste electrical products.
General| Brand | iWorX |
|---|---|
| Model | WR147E |
| Category | Lawn Mower |
| Language | English |
To Next Page