How to fix IXIA XGS2-HS licensing issues due to time discrepancies?
To resolve licensing issues on your IXIA Control Unit due to invalid licenses, configure the XGS2 to use NTP. This will synchronize the time. If NTP is unavailable, you can manually manage the time settings. The cause of this issue is time discrepancies between the network and the XGS2 system, which invalidates the installed licenses.
What to do if IXIA Control Unit has connectivity failures when assigning static IP addresses?
To resolve connectivity failures when assigning static IP addresses to your IXIA Control Unit, ensure the two management IP addresses are in the same subnet and not on certain internal virtual network subnets.
Details about the XGS2-HS and XGS2-SD processor module types and features.
Steps for unpacking the XGS2 chassis and connecting essential cables and peripherals.
Procedure for connecting the XGS2-HS processor module to the chassis and network.
Steps for configuring IP addresses and system settings for the XGS2-HS chassis.
Guide to managing the XGS2-HS system, including local and remote access.
Procedure for connecting the XGS2-SD processor module.
Steps for initial system configuration and IP address changes for the XGS2-SD chassis.
Comprehensive safety guidelines and warnings for operating the XGS2 chassis in English.
General| Port Density | Up to 16 ports per chassis |
|---|---|
| Interface Types | 10GbE, 40GbE, 100GbE |
| Form Factor | Modular chassis |
| Power Supply | Redundant power supplies |
| Description | The XGS2-HS is a high-performance, modular network testing platform designed for validating network infrastructure and services. |
| Performance | High-performance traffic generation and analysis capabilities with support for line-rate traffic generation and capture. Exact performance specifications depend on the modules installed. |
To Next Page