To Next PageTo Next PageWhy my Ixon IX2405 has no reception?
If your Ixon Network Router has no reception or is unable to connect to the network, the APN or SSID configuration might be incorrect, so you should check it. Alternatively, try resetting the device.
What to do if my Ixon IX2405 says PIN invalid?
If your Ixon Network Router displays 'PIN invalid', and you're using firmware 3.22 or higher, double-check the PIN. If you're using firmware 3.21.1 or lower, verify the PIN or PUK requirement.
How to troubleshoot Ixon Network Router waiting for internet access?
If your Ixon Network Router is waiting for internet access, first check your internet connection. If the connection is ok, verify your LAN settings.
What to do if my Ixon IX2405 requires PUK?
If your Ixon Network Router requires a PUK, unlock the SIM card using the PUK.
What to do if Ixon Network Router says SIM card is invalid?
If your Ixon Network Router shows that the SIM card is invalid or missing, check the SIM card installation and validity.
How to improve poor reception on Ixon Network Router?
If your Ixon Network Router is connected but has poor reception, try improving the router's placement to get a better signal.
How to resolve LAN/WAN conflict on Ixon Network Router?
To resolve a LAN/WAN conflict (conflicting subnets) on your Ixon Network Router, adjust the network settings to eliminate the conflicting subnets.
What to do if Ixon IX2405 was previously registered to the IXON Cloud?
If your Ixon Network Router was previously registered to the IXON Cloud, remove it from the IXON Cloud and then register it again.
What to do if my Ixon IX2405 Network Router was removed from the IXON Cloud?
If your Ixon Network Router has been removed from the IXON Cloud, re-insert the USB flash drive to register it again.
General| Ethernet Ports | 2 x 10/100 Mbps |
|---|---|
| Serial Ports | 1 x RS232 |
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 150 Mbps |
| Cellular | 4G LTE |
| Wireless Standards | 802.11 b/g/n |
| Power Supply | 9-30V DC |
| Antennas | 2 x External Antennas |
Details worldwide LTE, WCDMA, and GSM frequency bands supported by the IX2405 model.
Lists worldwide LTE, WCDMA, and GSM frequency bands supported by the IX2415 model.
Specifies the 802.11b/g/n Wi-Fi support and Client + AP mode for the IX2410 model.
Details the 802.11b/g/n Wi-Fi capability and Client + AP mode for the IX2415 model.
Lists the available ports on the IXrouter, including GbE LAN/WAN and USB 2.0.
Covers power supply, consumption, operating temperature, dimensions, physical specs, and certifications.
Instructions to create an account on the IXON Cloud for user and company setup.
Steps to create a configuration file via the IXON Cloud Fleet Manager app for the IXrouter.
Guidance on connecting the IXrouter using wired, 4G, or Wi-Fi options for cloud registration.
Confirmation that the IXrouter is successfully installed and integrated with the IXON Cloud.
Describes constant LED states indicating connection status and reception quality.
Explains blinking LED patterns for initialization, network connection, and registration issues.
