Need help?Do you have a question about the IXXAT USB-to-CAN II and is the answer not in the manual?
General introduction to the USB-to-CAN II interface.
Lists the technical features and capabilities of the USB-to-CAN II.
Provides information on obtaining support and contact details.
Instructions for returning hardware for repair or service.
Guide on installing the necessary driver software for the interface.
Instructions for physically connecting the USB-to-CAN II hardware.
Details the pin assignments for the USB connector and CAN 1/CAN 2 RJ45 connectors.
Describes the function and states of the USB status LED.
Explains the states and meanings of the CAN 1 and CAN 2 LEDs.
Describes CAN1 LS LED and LIN LED status for automotive variants.
Information on CAN bus termination resistors and their availability.
Configuration and usage details for the LIN Master interface.
Detailed technical specifications of the USB-to-CAN II, including interface, controller, and power.
Details the IXXAT CAN bus termination resistor accessory.
Information on the RJ45 to Sub-D9M cable adapter accessory.
Guidelines regarding Electromagnetic Compatibility (EMC) for the USB-to-CAN II.
Statement of compliance with EC directives.
Information regarding compliance with FCC regulations.
General| Interface | USB 2.0 |
|---|---|
| Galvanic Isolation | Yes |
| Operating System Compatibility | Windows |
| Power Supply | Via USB |
| Operating Voltage | 5 V |
To Next Page
