IZZIWOTNOT Skyline - Assembly; Assembling the Bed Ends; Attaching Ends to Side Rails

Assembly
3
1. Assembling the bed ends. (Take care not to scratch the product - Lay panels on carpeted surface).
C X 4
G X 4
2. Attaching the ends to the side rails.
E X 8
NB : To allow the fitting of the bed base do not tighten fully at this stage.
The base can be fixed in 3 positions, the lowest base position is the safest
and is the only one you should use once your baby can sit unaided.
These instructions show the base being fixed in the highest position.
High
Mid
Low
1a
1a
1a
1a
1b
1b
1b
2
2
Be careful when lifting ends as they may separate.
Mattress Height indicator
on inside of cot.