10
SAVE THESE INSTRUCTIONS
Parts of the Appliance
1. Handle
2. Main body
3. Base
4. On/off switch
5. Light indicator
6. Power cord
Before the First Use
• Fill to “MAX” with cold water without detergent.
• Place the kettle (2) on the base (3).
• Plug in and press the power button On/Off (4).
• Once the boiling process is finished, discard the water and repeat 2 to 3 times
Using your Kettle
1. Fill the kettle (2) with cold water.
HINT: Save energy – Do not boil more water than you need.
Attention! Make sure the water level does not exceed the MAX indication.
2. Place the kettle on the base (3).
3. Plug in and press the power button On/Off (4). The light indicator will turn on.
1
2
3
4
6
5
To Next Page
Loading...
